SSV distributor blocks are piston-type metering devices which reliably dispense the lubricant volume fed to the inlet in predetermined single quantities. By closing one outlet, the lubricant is fed to the next outlet below. This combining of outlets provides a large variety of metering possibilities. Additionally the internal porting avoids cumbersome external T-fittings. A special feature of the progressive metering device is that a previous feed line must supply lubricant before the next one can be supplied. This makes the progressive system easy to visually or electrically monitor.

​It is available with 6 to 22 outlets and can be used for greases up to NLGI 2 or oils of at least 40 mm /s. Lincoln progressive metering devices in block design have no defect-prone rubber seals. They can therefore be used with no problem at high differential pressure (up to 100 bar between two outlets) and for a wide range of temperatures. The maximum operating pressure is 350 bar.

The SSV-K distributor blocks have an indicator pin which allows for visual monitoring of how much lubricant is being dispensed. 

View our range of SSV-K Distributor blocks below: